Since the inception of lithium-ion battery, anode material related research mainly in the following categories: carbon materials, graphite, amorphous carbon materials, nitride, silicon-based materials, tin-based materials, new alloys, nano-oxides and other materials. As anode material for lithium ion batteries have the following performance requirements: Read More…

In the TG, DTA and other thermal analysis techniques, testing conditions often have greater impact on the results. For example, the sample volume, sample shape and accumulation conditions, heating rate, furnace atmosphere, and affection are TG, DTA curves of the shape and location. Therefore, regardless of the thermal spectrum in the test and analysis should be given adequate attention when. Read More…

Solid electrolytes include two categories: inorganic electrolyte and polymer electrolyte.

Inorganic electrolytes in selecting Read More…

Lithium-ion battery cathode material is usually embedded compound as an ideal cathode material, lithium intercalation compound should have the following properties:

① metal ions embedded in compounds with higher r Read More…

Carbon materials with graphite structure before, we must first go through a carbonization process, and then again in 2000 degrees for graphite.

carbonization process

Walker said: “Since the starting organic precursor by heat treatment to convert the former can be controlled with the arrangement of the carbon Read More…

Classical carbon materials was originally a very old material, its use can be traced back to BC, the large number of industrial production and applications as early as the mid 19th century had emerged. However, people on the basis of this theoretical study of solid materials have originated in the beginning of this century. After a very long era, the structure of carbon materials is the solid (crystal) structure of the field Read More…

7. Battery life determined by the number of repeated charge and discharge, it should try to avoid battery power than when charging, it will shorten the laptop battery life. Phone off for more than 7 days, should be first mobile phone battery is fully discharged, adequate electricity and then use.

8. Mobile phone battery self-discharge exist, not when the nickel-metal hydride batteries a day by about 1% of the remaining capacity of discharge, lithium batteries a day by 0.2% ~ 0.3% discharge. In charging the battery, try to use a dedicated outlet, do not share household electrical appliances such as charger and TV socket.

9. Although the mobile phone network coverage within the region, but the phone off when Dell laptop battery charging the phone is no longer acceptable and the call. At this point, you can use the phone’s not connected to the transfer of functions transferred to the phone side of the fixed phone in order to prevent loss of calls, this method is not for the mobile phone network coverage in weak signal area, or is temporarily unable to connect when you apply.

10. Do not expose the battery under high temperature or cold, like a dog day, and not turning the phone on the car, and withstood the scorching sun exposure; or get air-conditioned room, on the air conditioning blowing straight places. When charging, the battery a little heat is normal, but can not be Jinshou high temperature “suffering.” To avoid this from happening, it is best carried out at room temperature for Dell Studio 1537 battery charging, and do not cover anything on the phone.

11. Nickel-cadmium (N iCd) must ensure that the battery before the battery completely without electricity, and then charge must ensure that the battery fully charged.

12. If the phone battery to place too long without use, it is best to phone the maintenance department to apply to the batteries for a living dealing with, you can own with a constant voltage DC device, adjusting the voltage of 5 ~ 6V, current 500 ~ 600mA reverse Connect the battery. Note that the liberalization of touch, most can be repeated three times, after such treatment, re-use original charger to “adjustment” Dell XPS M1330 battery charge.

13. The longer the charge when he is not good, for not protecting the circuit full battery charge should be stopped immediately, otherwise the battery overheating due to heat or impact performance.

14. Lithium-ion battery charger must be selected precincts, or they might not reach saturation, impact on its performance. After charging, the charger should avoid placing more than 12 hours or more, long-term without the battery and Dell Vostro 1720 battery cell phone should be separated.

If users want to prolong the battery’s effective use of time, in addition to the quality of the charger should have guarantees, are essential for the proper charging techniques, because the poor quality of the charger or charging the wrong methods will affect the battery life and Dell Studio 1536 battery cycle life The following is the charging techniques:

1. The battery factory, manufacturers have carried out active treatment, and conduct a pre-charging, the batteries have more than electricity, a friend of mine said that the battery charge in accordance with the time period of adjustment, standby is still a serious shortage, if the battery is indeed the genuine battery, then this kind cases, an adjustment period should be extended a further 3 to 5 times fully charge and discharge.

2. If the new cell phone to buy a lithium-ion battery, then the first 3 to 5 times charge commonly referred to as an adjustment period, more than 14 hours should be sufficient to ensure the full activation of the lithium-ion activity. Lithium-ion battery without memory effect, but a strong inert, should be given to fully activated in order to guarantee Dell Studio 1555 battery that used to achieve the best performance.

3. Some automated intelligent rapid charger when the lights change direction, only that was full of 90%. Charger will automatically change with the slow charging the battery is full. Is best used after the battery is full, otherwise it will shorten the usage time.

4. Charging, lithium batteries do not need special discharge, discharge improper battery will be damaged. Charging as far as possible in order to slow Chong Chongdian to reduce the fast charge mode; time should not exceed 24 hours. After three to five times the battery fully charge and discharge cycles of its Dell Vostro 1710 battery internal chemicals will be all “activation” to achieve best results.

5. Use the original or the reputation of a good brand of chargers, lithium batteries use lithium laptop battery charger dedicated, and follow the instructions, otherwise it will damage the battery or even dangerous.

6. There are many users, often in charge when the phone open, in fact, it will hurt the mobile phone life very easily, because in the charging process, the cell phone circuit boards will be fever, at this time if there are external phone, you may create instantaneous return current, the phone’s internal parts damage.

With the emergence of high-definition films and television shows, consumer demand is also on the computer hard drives is growing. Toshiba is also a market response to this demand, launched a rare 400G notebook hard disk capacity of mass.

Exterior design, L523 Tanzania titanium silver-based color, panel is durable membrane transfer technology, concise fashion sense demonstrate Addict patterns; one with face recognition features built-in webcam, containing 6 Core battery weighs 2.3kg. The 14-inch mainstream laptop using the ratio 16:9 widescreen design, a resolution of 1366 × 768, to meet the needs of the user’s Dell Vostro F287F battery audio and video.

Configuration, the Toshiba Satellite L523 notebook is powered by Intel Pentium Dual Core T6600 processor (2.2 GHz, 2MB secondary cache, 800MHz front side bus), with 2GB RAM, 400GB hard drive, DVD burner, using ATI Mobility Radeon HD 4530 (256MB) discrete graphics, Dell Inspiron B battery, and come preloaded with Windows Vista Home Basic operating system.

Interface connection, two USB2.0 interface, a USB 2.0/eSATACombo interface, a VGA port, 1 RJ45 interface, a group headphone output and microphone input. The preparation of the adaptive network 10/100/1000M Ethernet card, Intel802.11a/g/n wireless network card, Dell Inspiron 1210 battery , the official nominal life time for 2-3 hours.

Edit Comment: L523 in performance there is a definite upgrade, 400G hard drive is also very creative, I believe that it will be able to meet the user’s entertainment needs.

First, A battery made up of: battery, rechargeable battery, composition: zinc skin (metal), carbon rod, mercury, sulfuric acid compounds, copper cap; battery with lead-based compounds. For example: 1, the composition of waste zinc-manganese battery, weighing 70 grams, of which carbon rod 5.2 grams, 7.0 grams of zinc skin, manganese powder 25 grams, 0.5 gram of copper cap, the other 32 grams Dell Latitude D410 battery.

Second, the danger of used battery: hazards of waste battery mainly concentrated in a small amount of heavy metals contained in them, such as lead, mercury, cadmium. These toxic substances enter the body through various means, long-term savings and difficult to remove, damage to the nervous system, hematopoietic function and bone, and even can cause cancer. Lead: nervous system (nerve weakness, numbness of hand-foot), digestive system (dyspepsia, abdominal cramps), blood poisoning and other diseases. Mercury: Mental state of change is one of the major symptoms of Dell Vostro A840 battery mercury poisoning. Pulse speed, muscle vibration, mouth and digestive system diseases. Cadmium, manganese: The main harm the nervous system. 3, used battery polluting ways: the material composition of these battery during use, is sealed inside the battery shell and does not affect the environment. However, after a long-term mechanical wear and corrosion, making the internal leakage of Dell Studio 1737 battery heavy metals and acid-base and so on out into the soil or water, it will through a variety of ways to enter the human food chain. Process summarized as follows: Pool microbial food crops, animals, circulating dust deposition of human neurological disease.

Third, Other water sources, bio-digestion of plant food intake of heavy metals from the environment can be through the food chain biomagnification, grade by grade in the higher organisms tens of thousands of land-rich product, and then enter the human body through food, and in some organs savings cause chronic poisoning. Japan’s water (one plus Wu) disease is a typical case of Dell Vostro 1520 battery mercury poisoning. Fourth, the performance of used battery against the other: the world’s main municipal solid waste sanitary landfill, composting and incineration of three ways, mixed with garbage of used battery in these three roles in the process of pollution is reflected in: landfill: waste the role of the battery of heavy metal pollution of water bodies through leachate and soil. Incineration: waste battery in high temperature, corrosive, some heavy metals in the incinerator fly ash in volatile, causing atmospheric pollution; incineration bottom heavy metal accumulation, to the ash generated by pollution. Composting: scrap battery high content of heavy metals, resulting in lower quality compost. Re-use: general use of reflective fire metallurgy, process while easy to master, but the Dell Inspiron E1705 battery recovery rate is only 82%, the rest of the lead in the form of gas and dust appear at the same time refining the process of sulfur dioxide into the air, causing secondary pollution, direct endanger the health of workers operate.